More SATABeast multipathing…
Zoning changes get picked up properly…
Mar 4 11:41:26 munter fctl: [ID 517869 kern.warning] WARNING: fp(0)::N_x Port with D_ID=640f13, PWWN=5000402102fc12d2 disappeared from fabric Mar 4 11:41:26 munter scsi: [ID 243001 kern.info] Target 0×660813: Nonzero peripheral qualifier: Device type=0×0 Peripheral qual=0×1 Mar 4 11:41:26 munter scsi: [ID 243001 kern.info] Target 0×660913: Nonzero peripheral qualifier: Device type=0×0 Peripheral qual=0×1 Mar 4 11:41:26 munter scsi: [ID 243001 kern.info] Target 0×640e13: Nonzero peripheral qualifier: Device type=0×0 Peripheral qual=0×1
There’s more though:
Mar 4 11:42:08 munter scsi: [ID 243001 kern.info] Target 0×660913: Nonzero peripheral qualifier: Device type=0×0 Peripheral qual=0×1 Mar 4 11:42:09 munter scsi: [ID 243001 kern.warning] WARNING: /pci@0,0/pci10de,5d@d/pci1077,137@0/fp@0,0 (fcp0): Mar 4 11:42:09 munter Failed to create nodes for pwwn=5000402201fc19ca; error=0 Mar 4 11:42:09 munter scsi: [ID 243001 kern.info] Target 0×640e13: Nonzero peripheral qualifier: Device type=0×0 Peripheral qual=0×1 Mar 4 11:42:09 munter scsi: [ID 243001 kern.warning] WARNING: /pci@0,0/pci10de,5d@d/pci1077,137@0/fp@0,0 (fcp0): Mar 4 11:42:09 munter Failed to create nodes for pwwn=5000402202fc12d2; error=0 Mar 4 11:42:42 munter scsi: [ID 243001 kern.info] Target 0×640e13: Nonzero peripheral qualifier: Device type=0×0 Peripheral qual=0×1 Mar 4 11:42:42 munter scsi: [ID 243001 kern.warning] WARNING: /pci@0,0/pci10de,5d@d/pci1077,137@0/fp@0,0 (fcp0): Mar 4 11:42:42 munter Failed to create nodes for pwwn=5000402202fc12d2; error=0
The above is me trying to configure the second path (ie, to the second controller) on SB1MVB, with the primary controller out of the zone (so invisible), no less. Still no joy.